- Four element/retention styles available: Fixed (KMS) for general laminar/transitional/turbulent blending or dispersion; Element Assembly (KMA) for insertion into a customer's existing housing; Removable (KMR) where periodic cleaning or inspection is needed; and Edge-Sealed (KME), furnace-brazed to the housing wall for maximum heat transfer and to eliminate dead areas
- Mixer housings available with plain, threaded, weld-prep, or flanged ends, including raised face slip-on, weld neck, lap joint, ring joint, and Grayloc-type hub flange styles
- Wide material selection: carbon steel, 304/304L/316/316L stainless, Alloy 20 Cb-3, titanium, Monel 400, Nickel 200, Inconel, Hastelloy C-276/B-2, FRP, PVC, CPVC, PTFE, Kynar, PVDF, tantalum, and zirconium
- Design pressures to over 10,000 psi; ASME/B31.3 certification and testing available
- Internal surface finishes down to 8 microinches available on KME for fouling-sensitive service
- Diameters available to over 8 feet, with full custom fabrication offered
Kenics KM Static Mixers
Kenics KM static mixers use a patented helical mixing element to direct flow radially toward the pipe wall and back to the center, with alternating right- and left-hand elements adding further velocity reversal and flow division. The design mixes liquids, gases, or solids continuously within the pipeline with no moving parts, eliminating radial gradients in temperature, velocity, or composition.
Features & Benefits
Applications
- Manufacturer markets the line across chemicals, refining, polymers, food, pulp and paper, and water/wastewater treatment, among other industries
- Cited duty types: laminar and turbulent blending, liquid/liquid dispersion, gas/liquid dispersion, heating/cooling, residence time control (promoting plug flow), and temperature uniformity
- Manufacturer's published application list spans agricultural chemicals, chemicals, cosmetics, energy, food, pharmaceuticals, grain processing, minerals processing, OEM, paints & resins, petrochemical & refining, polymers & plastics, pulp & paper, rubber processing, textiles, and water & wastewater treatment
Performance
- Sizes: 3/16 in. to 120 in.
- Heat transfer rates 3-10 times greater than open tubes (edge-sealed elements)
- Geometry limited to round pipe, tubing, or duct
- Retention types: welded, removable, and edge-sealed
About The Manufacturer
Geiger Pump and Equipment is proud to represent Kenics in the Mid-Atlantic market. Kenics is the industry standard for inline static mixing and heat transfer — delivering precise blending, dispersion, and thermal transfer with no moving parts and no external power. Kenics static mixers and heat exchangers are trusted across the chemical, pharmaceutical, food and beverage, water and wastewater, pulp and paper, and oil and gas industries, offering heat transfer rates significantly higher than conventional shell and tube designs. Backed by Geiger's application expertise, we'll help you find the right Kenics solution for your process.
ABOUT US
Welcome to Geiger Pump & Dump Company
We are hiring! Learn more about our open opportunities
Geiger distributes, manufactures and services Industrial and Municipal Pump and Process Equipment, mixers, valves, fans, blowers and vacuum pumping equipment throughout the Mid-Atlantic and Northeast. Our Packaged Fluid Systems are shipped worldwide. We are the largest and oldest firm of our kind in the Mid-Atlantic.
